Quick answer

We make metal panels for the outside of buildings. A panel can give a wall a clean look. It can also hide parts of the building. But a panel is not the full wall. The full wall also needs support, joints, drainage and a safe fixing plan. We review these points before we make a panel. Send us your drawings first. We can then check the size, shape, finish and hole pattern. If you do not have full drawings, we can help you plan the product.

See our product range: Aluminum cladding and facade products.

Figure 1. A simple project path from drawings to care.

1 Introduction

An exterior metal wall panel is a metal sheet on the outside of a building. We use it for walls, entries, columns and screens. The panel may be flat. It may have holes. It may also have a wave or a curve. We make each panel from the agreed drawings.

We start with the job site. We ask where the building is. We ask how much sun, rain, dust or salt it will face. We also ask how the panel will meet other parts of the wall. These facts help us choose the right product.

2 Types

· Solid aluminum panels give a clean and even look.

· Perforated panels have holes. They can let air and light pass through.

· Corrugated panels have a shaped face. They add depth to a wall.

· Metal mesh works well for screens and open areas.

· Formed panels can wrap a column or follow a curve.

We do not use one size for every job. Our public product pages show this. One listed perforated aluminum panel is 300 by 1200 mm and 2.5 mm thick. Another listed panel is 1200 by 2400 mm and 2.35 mm thick. These are examples only. Your drawing sets the final size.

Product examples: Perforated aluminum cladding panels.

3 How we use panels

We use exterior metal wall panels on facades, entry areas, soffits and column wraps. We also use them to screen plant rooms. A good panel plan starts with the look you want. It then checks the wall behind the panel. It also checks the way rain can leave the wall.

For a panel with holes, we check what sits behind it. We check if people can see through it. We check if the panel needs a back layer. We also plan how it can be cleaned. Small checks like these help avoid a poor result later.

Real project examples

Our Bozhou Radio and Television Center case is in Anhui, China. Our case page lists PVDF finish aluminum cladding panels. It lists a quantity of 16,000 m2.

Case link: Bozhou Radio and Television Center.

Our Guangzhou M LIVE Shopping Mall case is in Guangzhou, China. The case page lists custom aluminum cladding panels and 600 by 600 aluminum ceiling panels. It lists a total quantity of 12,000 m2. 

Case link: Guangzhou M LIVE Shopping Mall.

4 Good points and limits

Metal panels can give you many design choices. We can make flat panels, panels with holes, and shaped panels. We can also offer powder coat or PVDF finish on listed products. A factory made panel can help keep the look even across a large wall.

Panels also have limits. A large panel may need more support. A thin panel may need folds or stiffeners. A hard pattern can take more time to make. The finish must suit the site. We ask you to approve samples before full production.

We do not give a useful final price from one short message. The price can change with the metal, size, thickness, shape, finish, order size and shipping plan. Clear drawings help us give a clear quote.

5 Care and maintenance

We ask building owners to plan care from day one. Dirt, salt and smoke can build up on a wall. The best cleaning plan depends on the site and the finish. Follow the finish maker guide and the site care plan.

Check the wall for dirt, marks, loose parts and blocked drain paths. Use a cleaner that is safe for the finish. Do not use harsh pads or strong chemicals. Test a small hidden area first.

For panels with holes, check the space behind the panel when safe to do so. Do not remove a panel without the approved steps. This helps keep the wall safe and dry.

6 Industry outlook

We see more projects that want a clear look and a custom wall. This can mean a new shape, a new color or a new hole pattern. Good drawings still matter. A new look must also be safe to make and easy to fit.

We think digital drawings and sample checks will stay important. They help us spot issues early. They also help the client see the final look before we make the full order.

7 Our team service

When you have drawings, we check if we can make the panels as shown. We review size, finish, holes, shape and order amount. We then tell you what we need to confirm. When you need help, we can also help choose the product and plan the design direction.

Please send us your drawings, job location, area, finish need and target date. Add any photos or idea images you have. We will use this information to review the job and prepare the next step with you.

Contact us: Send a project inquiry and share drawings.

Sources

We use our public product and case pages for the facts in this guide. We do not promise a fixed price, a fixed panel size or a fixed result for every job. We confirm each job from its drawings and agreed scope.

1. Company home and product directory

2. Perforated aluminum cladding panel product example

3. PVDF coated perforated cladding panel product example

4. Bozhou Radio and Television Center project record

5. Guangzhou M LIVE Shopping Mall project record